 |
 |
Authorized BRIGGS AND STRATTON
10A902 ENGINE SALES
AND SERVICE
BRIGGS AND STRATTON 10A902
SEARCH BY MANUFACTURER SEARCH BY PART NUMBER SEARCH BY MODEL NUMBER If what you are looking for did not show up, use your back button and click the search button again. |
BRIGGS AND STRATTON ENGINE 10A902 used on various makes of push mowers.
This page is being built to provide service information tips.
If you are needing information about parts lookup, simply see
the Illustrated Parts Listing for your part numbers.
IPLIllustrated Parts ListingBy Engine Model Number |
This table is being provided with helpful information regarding this engine. Not all parts listed in the IPL will be listed here, just the ones we believe information may be asked about.
IPL |
PART |
PART |
SERVICE |
| REPAIR MANUAL ALWAYS USE THE PROPER REPAIR MANUAL TO FIND THE PROPER TORQUE SPECIFICATIONS. |
270962 | SINGLE CYLINDER "L" HEAD (BUILT AFTER 1981) REPAIR MANUAL | SEE OUR BRIGGS MANUALS TO BUY THIS MANUAL |
| 90 | 498811 |  CARBURETOR ASSEMBLY |
ALL OF REFERENCE 90 INCLUDED IN 498811 |
| 163 | 271139 |  GASKET AIR CLEANER |
SEE NOTES FOR PART REFERENCE 534 |
| 200 | 691912 |   GOVERNOR BLADE |
SEE NOTES FOR PART REFERENCE 426 |
| 201 | 690347 |  AIR VANE LINK |
SEE NOTES FOR PART REFERENCE 209 AND 211 |
| 209 | 690254 STANDARD SPRING, SEE NOTES FOR YOUR SPECIFIC SPRING NEEDED. |
 GOVERNOR SPRING PROPER INSTALLATIONThe long "loop" end connects with the loop on the "AIR VANE LINK, REFERENCE 201". The round loop end of the Governor spring connects with adjustable "tang" on the control bracket reference 222. CAUTION-Don't stretch the governor spring! |
The governor spring shown is the STANDARD governor spring. See the Illustrated parts listing to identify your specific governor spring used for your TYPE code. |
| 211 | 691859 |  GOVERNOR IDLE SPRING
PROPER INSTALLATIONOne of the loops on the idle spring connects on the loop of the "AIR VANE LINK, REFERENCE 201". The other end of the Idle spring connects with stationary control bracket reference 222. CAUTION-Don't stretch the idle spring! |
SEE NOTES FOR PART REFERENCE 426 |
| 222E | 691446 |  CONTROL BRACKET |
|
| 333 | 496914 |  ARMATURE MAGNETO (IGNITION COIL) |
AIR GAP IS IMPORTANT. BEFORE BUYING THIS PART, CHECK YOUR AIR GAP. IT SHOULD BE .006" To .010" BETWEEN THE ARMATURE AND FLYWHEEL (SET AT THE MAGNET/S ON THE FLYWHEEL)ALSO MAKE SURE YOUR SPARK IS NOT BEING GROUNDED BY THE ENGINE KILL SWITCH OR BARE SPOT ON THE WIRE GOING TO THE KILL SWITCH. MAKE SURE THE SPARK PLUG END AND THE ARMATURE OUTPUT WIRE HAVE A GOOD CONNECTION AND THAT THE METAL CONNECTOR ON THE END OF THE OUTPUT WIRE IS SECURELY ATTACHED |
| 337 | 802592 (CHAMPION RJ19LM) 492167 |
 SPARK PLUG |
THE DIFFERENCE BETWEEN THESE TWO PLUGS IS THE ONE WITH THE R IS A RESISTOR TYPE PLUG MORE INFORMATION BUY THIS PART CLICK HERE |
| 394 | 495770 |  DIAPHRAM AND GASKET SET FOR THE CARBURETOR |
VIEW IMAGE OF THIS PART MORE INFORMATION BUY THIS PART CLICK HERE |
| 426 | 691107 | SCREW FOR GOVERNOR BLADE |
SEE NOTES FOR PART REFERENCE 200 |
| 534 | 691417 |  SCREW (AIR CLEANER) |
IF THIS SCREW WILL NOT PROPERLY SECURE AIR FILTER ASSEMBLY, YOU SHOULD CHECK THE SCREW HOLE FOR DIRT CAUSING THE SCREW TO NOT SCREW IN ALL THE WAY. THE SCREW HOLE IS PART OF THE FUEL TANK, LOOK DOWN INSIDE THE CARBURETOR TO INSPECT. THE CARBURETOR AND FUEL TANK MAY HAVE TO BE REMOVED TO PROPERLY CLEAN THIS HOLE. DO NOT OVER TIGHTEN, CHECK FOR DIRT IN THE HOLE! THE AIR CLEANER ASSEMBLY SHOULD NOT TURN OR WOBBLE IF THE SCREW IS PROPERLY TIGHTENED AND GASKET REFERENCE 163 IS IN PLACE. |
| 535 | 272235S USED WITH METAL AIR CLEANER HOUSING REFERENCE 536 |
 AIR FILTER FOAM |
FOR PROPER AIR FILTER SERVICE THIS FILTER SHOULD BE OILED. SQUEEZE OUT ANY EXCESS |
| 535A | 698369 USED WITH PLASTIC AIR CLEANER HOUSING REFERENCE 536A |
 AIR FILTER FOAM |
FOR PROPER AIR FILTER SERVICE THIS FILTER SHOULD BE OILED. SQUEEZE OUT ANY EXCESS |
| ILLUSTRATED PARTS LOOKUP FOR OTHER BRIGGS AND STRATTON ENGINES |
BRIGGS AND STRATTON ENGINE PARTS AND PRICING | CONTACT US | OUR COMPLETE ONLINE CATALOG | SITE MAP |
This web site has been made available to you for the enhancement of the services
we provide to our customers. We've provided a number of resources here to help you resolve BRIGGS AND STRATTON 10A902 ENGIINE problems, find parts FOR BRIGGS AND STRATTON 10A902 ENGINES you need, and suggest improvements to
our service OF PROVIDING BRIGGS AND STRATTON 10A902 ENGINE PARTS.
Copyright © 2008
AAAA Generator and Pressure Washer, Inc.
DBA:Arkansas OPE
All rights reserved.
Last modified: JULY 30, 2008
All products mentioned are registered trademarks or trademarks of their respective companies.